Agriculture Engineering Study Question & Answer
Agriculture Engineering Study Question
Subject:- Agriculture Engineering
Special 30 One Liner Questions
| Question | Answer |
| Father of agricultural engineering in India is? | Proff. Mason Vaugh |
| Average man can develop maxiımum power of about? | 0.1 hp (74.6 watts) |
| One average bullock deveiop maximum power of about? | 0.5 hp |
| Power developed by an average bullocks pair is about? | 1 hp (746 watts) |
| The use of tractor is considered economical when it is utilized for? | 1000 hrs./year |
| Woriking life of tractor drawn cultivator is usually? | 2500 hour’s |
| Length of Metric surveying chain and Steel band chain is? | 20 m & 30 m long |
| Length of Guntur chain is? | 66 Feet (20 m) |
| Guntur chain is divided into 100 link each link of? | 0.66 feet |
|
Length of Engineer chain is 100 feet (30 m) long and divided into 100 link each link of?
|
1 feet |
| Length of Revenue chain is: 33 feet long and divided into 16 link, Each link of? | 2.06 feet |
| Plan of cutting edge of the disc is inclined to direction of travel is known as? | Disc angle |
| Plan of cutting edge of disc is inclined to vertical line is known as? | Tilt angle |
| In Standard disc plough, penetration is improved by: Increasing the disc angle & Decreasing the? | Tilt angle |
| The disc angle of good disc plough is varies between? | 42° to 45° |
| Tilt angle is varies between? | 15° to 25° |
Agriculture Engineering Study Question
| Question | Answer |
| Hand operated sprayers operated at a pressure? | 1-7 kg/sq.cm |
| Power operated sprayers operated at a pressure of? | 20-25 kg/sq.cm |
| Tank capacity of Knapsack spray is? | 9-25 litre |
| The tractors having three or four pneumatic wheels are called? | Wheel tractor |
| Walking type tractor is known as? | Power tiller |
| M.B.Plough and Disc Plough are used as? | Primary tillage implements |
| Maximum clearance between landside and horizontal surface is known as? | Vertical suction |
| Vertical suction of a MB plough influences? | Depth of cut |
| Vertical suction of a plough varies between? | 6 to 20 mm |
| Horizontal suction is the amount of share is bent out of line with? | Landside |
| Gauge wheel is used to maintain the uniform | Depth of ploughing |
| Size of disc in disc plough varies between? | 60 to 90 cm |
| The depth of the subsoiler varies between? | 40 to 100 cm |
|
Thickness of disc in disc plough varies between?
|
5 to 10 mm |
Agriculture Engineering Study
Agriexam.com Provide to you Entomology One Liner Question for Exams Like IBPS- AFO (Agriculture Field Officer) IFFCO, KRIBHCO, NFL, NSC, ICAR-JRF/SRF/ ARS, IARI, TNAU, RAEO, RHEO, ADO, SADO, DDA, ADA, MP Vyapam (PEB), FCI, ASRB, ARS, B.Sc. Agriculture Exam, M.Sc. Agriculture Exam, University Exam, KVK Agriculture Supervisor ,Assistant Agriculture Officer, Central Warehouse Corporation , Food Corporation of India, And Other Agricultural Exam .
| More Entomology Study Material | Open |
| More Quiz For All Agriculture Exams | Open |
| Agriculture Test Series on App | Open |
| Buy Agriculture Books | Open |
